|
|
-
Data Rate: Modem
- Send up to 33,600 bps / Receive up to 56,000 bps FAX
– up to 33,600 bps
|
-
Compatibility: Modem
– V.90, K56 flex, V.34, V.32 bis, V.32, V.22 bis, V.22,
V.23, V.21, Bell 212A & Bell 103. Supports
ECC: V.42 LAPM, MNP 2-4 and MNP 10 Error Correction. V.42 bis and MNP 5
Data Compression, MNP 10 EC™
Enhanced Cellular Performance. FAX
– V.17, V.29, V.34, V.27 ter
and V.21 channel 2. Supports
T.30 protocol.
|
-
Operational Modes: Full
or Half Duplex, Auto Dial, Auto
Answer, Auto Redial, Tone or
Pulse
|
-
Internal Telephone Number Directory: Supports
4 saved numbers of 35 characters each.
|
-
Dialing: DTMF
- in accordance
with CCITT Q.23 Pulse: in
accordance with EIA/TIA-496-A Blind
- by command
|
|
|
-
Command Buffer: 40
Character
|
-
Host Interface: PC/104
pass-through connector for 8 bit bus
|
-
Telephone Interface: RJ-11C
line jack (only Tip & Ring required)
|
-
Command Set: Full
AT including Extended Commands,
S Registers, Result Codes
|
-
Size & Weight: 3.55
x 3.775 x 0.55 in (90 x 96 x 14mm),
2.45oz (69.4gm)
|
-
Line Impedance: 600
ohms, ±10%
|
-
Power – Full Config:
Off Hook: 5V
±10% typ 140mA Idle: 5V
±10% typ 120mA Sleep
Mode: 5V
±10% typ 55mA
|
-
Environmental Specifications
-
- Operating Temperature: 0°C
to +70°C (32°F to 158°F)
-
- Storage Temperature: -55°C
to +125°C (-67°F to +257°F)
-
- Relative Humidity: Up
to 90% noncondensing, or wet bulb temp to 35°F,
whichever is less
-
- Extended
Temp Version:-40° to +85°
C, 0-90% RH noncondensing
|
|
|
Options
|
|
|
-2
|
Extension
phone jack
|
|
|
-CID
|
Caller
ID
|
|
|
-EXT
|
Extended
temperature from -40°
to 85°
C, 0-90% RH noncondensing
|
|
|
-J2
|
PC/104
16 bit J2 pass-through connector
|
|
|
-LCS
|
Loop
Current Sense – detects line is use
|
|
|
|
