|
|
-
Data Rate: Modem
- send to 33,600 bps, receive to 56,000 bps FAX
– up to 33,600 bps
|
-
Compatibility: Modem
– V.90, ITU-T V.34 enhanced, V.34, V.32bis, V.32, V.22bis,
V.22; Bell 212A and 103/113; ITU-T V.29, V.42, V.42bis; ITU-T V.21 &
V.23 in international versions. FAX
– ITU-T Group 3. Class 1 and 2, T.4, T.30, V.21, V.27ter,
V.29, V.17 and TIA/EIA TR29.2
|
-
Operational Modes: Full
or Half Duplex, Auto Dial, Auto
Answer, Auto Redial, Tone or
Pulse
|
-
Internal Telephone Number Directory: Supports
3 saved numbers of 35 characters each.
|
-
Dialing: DTMF
- in accordance
with CCITT Q.23 Pulse: in
accordance with EIA/TIA-496-A Blind
- by command
|
|
|
-
Command Buffer: 40
Character
|
-
Host Interface: PC/104
pass-through connector for 8 bit bus
|
-
Telephone Interface: RJ-11C
line jack (only Tip & Ring required)
|
-
Command Set: Full
AT including Extended Commands,
S Registers, Result Codes
|
-
Size & Weight: 3.55
x 3.775 x 0.55 in (90 x 96 x 14mm),
2.22oz (62.8gm)
|
-
Line Impedance: 600
ohms, ±10%
|
-
Power – Full Config: Off
Hook: 5V
±5% typ 165mA
On Hook: 5V
±5% typ 155mA
|
-
Environmental Specifications
-
- Operating Temperature: 0°C
to +70°C (32°F to 158°F)
-
- Storage Temperature: -55°C
to +125°C (-67°F to +257°F)
-
- Relative Humidity: Up
to 90% non-condensing, or wet bulb temp to 35°C, whichever is less.
-
- Extended Temp Version:-40°
to +85° C, 0-90% RH non-condensing
|
|
|
Options
|
|
|
-EXT
|
Extended
temperature from -40°
to 85°
C, 0-90% RH non-condensing
|
|
|
-J2
|
PC/104
16 bit J2 pass-through connector
|
|
|
-IS
|
Serial
Port (available with DB-9 or straight 10-pin connector)
|
|
|
|
